Qingdao color emery flooring, wear shop floor metal aggregate wear-resistant floor (Emery wear floor) with a special mineral aggregate alloy wear-resistant materials and professional equipment by professional finishing. Mineral aggregate wear alloy material is an alloy selected mineral aggregates from certain particle size distribution, and special cement, composed of high polymers and other additives, can be used to open the bag. The wear-resistant material evenly spread in the upcoming stage of the initial setting of the concrete surface, by means of professional processing, making it the concrete floor to form a whole. Metal aggregate wear-resistant flooring with high density and color, wear and cleanliness is good. Scope: Applicable to all kinds of requirements and reduce wear and dust concrete floor and the ground. For example: parking, underground garages, industrial plants, roads, service stations, warehouses, docks and the need for a unified color and improve environmental health and beauty of the place. Product Features: 1, enhanced wear resistance and hardness of the concrete floor surface; 2, greatly increasing the density of the concrete surface to reduce dust generation; 3, an increase of ground oil resistant and easy to clean, anti-infiltration; 4, together with the concrete floor construction, short construction period; 5, humid environment does not rust; 6, durability, reduced costs due to the periodic painting or surface thickening brought; 7, can improve the resistance to dilute acid corrosion. Technical parameters: Wear: ball bearing method based on the test results: 1, compressive strength: ≥110.0Mpa 2, flexural strength: ≥14.5Mpa 3, Mohs strength: ≤3.0mm 4, abrasion resistance ratio: ≥380 % or more parameters for the experimental test results under the national standard conditions. Color: dark green, light green, dark gray, light gray, red brick, cement color, russet, yellow, creamy white, gray, etc.